Skip to content
Blog

Ecommerce

Click and Collect for Retailers: A Practical Setup Guide

Nov 19, 2026 10 min read

Learn how to set up click and collect for your retail business, from store selection and inventory accuracy to order preparation and customer pickup.

Click and Collect for Retailers: A Practical Setup Guide

Click and collect lets customers place an order online and collect it from a retail store or another designated pickup point. It combines online ordering with local fulfilment. Customers can choose a convenient collection location, while retailers can use their stores as part of the online order process.

The idea is simple. The setup needs care. Store inventory must be accurate, staff need a clear picking process, and customers should know exactly when and where to collect their order.

This guide explains how retailers can plan click and collect, prepare their teams and give customers a reliable pickup experience.

1. Decide how click and collect will work

Start by choosing the type of pickup service you can support. You might offer:

  • Store pickup: Customers collect from a staffed counter inside the store.

  • Curbside pickup: Staff bring the order to a designated parking or collection area.

  • Collection point: Customers collect from a separate counter, kiosk or partner location.

  • Same-day pickup: Customers collect within a stated time if stock is available and staff can prepare it.

Begin with the simplest option that suits your store. A busy shop may need a separate collection counter. A smaller retailer may be able to hand over orders at the usual service desk.

Decide whether customers can choose any branch or only stores with available stock. Also decide whether orders can be transferred between locations, and how you will handle products that are available at a warehouse but not at the chosen store.

2. Choose which products customers can collect

Not every item is suitable for pickup. Check whether products need special packing, temperature control, assembly or handling. Oversized products may need a separate collection process or vehicle requirements.

For each eligible product, confirm:

  • Which locations can fulfil it

  • Whether stock is held at the store or transferred from a warehouse

  • How long preparation usually takes

  • Whether the item needs to be inspected or assembled

  • What happens if part of the order is unavailable

Show pickup availability on the product page or during checkout. If a customer must select a specific branch to see availability, explain that clearly.

Avoid promising “ready today” unless staff can reliably pick, check and prepare the order within that timeframe.

3. Check inventory accuracy before launch

Inventory accuracy is central to click and collect. If the website says an item is available but the store cannot find it, the customer may arrive to an incomplete order or a cancellation.

Review how stock is recorded across your ecommerce platform, point-of-sale system, warehouse and physical stores. Decide which system is the source of truth and how quickly changes should appear online.

For each pickup location, consider:

  • Stock currently available for sale

  • Items already reserved for other orders

  • Damaged or display stock

  • Stock awaiting a transfer or delivery

  • A safety buffer for fast-moving products

If your system cannot update stock in real time, use a cautious availability rule. For example, only offer pickup when the recorded quantity is above a minimum level, or require staff to confirm availability before promising collection.

AFA’s Ecommerce Fulfillment UAE service connects ecommerce, inventory, warehouse and order workflows, which can help retailers coordinate pickup alongside delivery. AFA Technologies

4. Set up pickup options in your online store

Configure pickup as a fulfilment choice at checkout. Show the customer:

  • The available pickup locations

  • The address and opening hours for each location

  • Whether the item is currently available there

  • The expected preparation time

  • Any pickup fee or minimum order value

  • How long the order will be held

Let customers select a location before they pay, if availability depends on the branch. Make sure the selected location appears on the order confirmation and staff order view.

If your store supports different stock by location, test how the platform handles mixed orders. For example, can one order include items from two branches? If not, explain the limitation and offer a clear alternative.

A considered ecommerce development setup can connect these choices to catalogue, inventory and order workflows.

5. Create a clear order preparation process

Once the order comes in, staff need to know who will pick it, where to find the products and how to mark it ready.

A basic workflow is:

  1. The store receives a new pickup order.

  2. A staff member accepts or reviews the order.

  3. The items are picked from the sales floor or stockroom.

  4. The order is checked against the order details.

  5. Items are packed or labelled for collection.

  6. The order is moved to a designated holding area.

  7. The customer receives a “ready for pickup” message.

Set a realistic preparation target based on staffing and order volume. Assign responsibility for checking orders during busy periods, staff breaks and store opening or closing times.

Do not mark the order ready until the items are physically located and set aside. This helps prevent customers from arriving while staff are still searching for stock.

6. Separate pickup orders from store stock

Once an order is picked, mark those units as reserved or allocated. Otherwise, they may still appear available for another online order or be sold to a walk-in customer.

Use a clearly labelled holding area. Separate orders by pickup date, customer name or order number. Keep customer details out of public view and limit access to staff who need them.

If an order is cancelled or not collected, staff should follow a consistent process to release the stock back into available inventory. Decide when an uncollected order expires and how customers will be notified before you restock or cancel it.

7. Keep customers informed

The customer should receive a confirmation after placing an order, but that message should not imply that the order is ready unless it has been picked and checked.

A useful message sequence is:

  • Order received: Confirm items, selected location and expected preparation time.

  • Ready for pickup: Give the collection address, opening hours and instructions.

  • Reminder: If the order remains uncollected, send a reminder before the holding period ends.

  • Collected: Confirm completion and share a support contact in case there is an issue.

Keep instructions specific. Tell the customer where to go, what information to show and whether someone else may collect the order. If your store offers curbside pickup, explain where the customer should park and how to notify staff.

8. Make collection quick and easy

A customer who has already paid online should not have to repeat the entire checkout process at the store. Set up a clear pickup point and train staff to find orders quickly.

You can ask the customer to show an order number, confirmation email or other suitable proof of purchase. Staff should verify the order before handing it over and record that it has been collected.

For curbside pickup, give customers a simple way to let the store know they have arrived. This could be a phone number, an online check-in button or instructions in the ready message.

Use clear signs inside or outside the store. If the collection counter is not near the entrance, explain how to find it.

9. Plan for changes and exceptions

Create simple instructions for common problems:

  • An item cannot be found: Contact the customer before substituting or cancelling it.

  • Only part of the order is ready: Tell the customer what is available and agree on the next step.

  • The customer wants another location: Check whether the order can be transferred and update the customer before they travel.

  • Someone else is collecting: Decide what verification you need and explain it in advance.

  • The order is not collected: Send a reminder and follow your stated holding and cancellation policy.

  • A customer wants to return an item: Explain whether the store can process the return and what information to bring.

Avoid making promises about substitutions, refunds or return eligibility unless they match your actual policies and system setup.

10. Train staff and test the whole journey

Click and collect is both a website feature and a store process. Train the staff who receive, pick, check and hand over orders. Give them a short written procedure and a way to flag issues.

Before announcing the service, place test orders from a mobile phone and desktop. Check:

  • Whether the right pickup locations appear

  • Whether stock availability is correct

  • Whether the preparation time is clear

  • Whether staff receive the order notification

  • Whether the customer gets the right messages

  • Whether the order can be found and marked collected

  • Whether inventory updates after collection or cancellation

Test a typical order and an exception, such as an unavailable item. Fix unclear steps before a busy sales period.

11. Measure the service and improve it

Track a few practical measures:

  • Time from order placement to “ready for pickup”

  • Percentage of pickup orders collected

  • Number of orders delayed or cancelled

  • Stock discrepancies found during picking

  • Customer enquiries about pickup instructions

  • Returns or issues linked to collection

These measures can show whether the promised preparation time is realistic, whether inventory is reliable and whether customers can find the pickup point.

Collect feedback from store staff as well as customers. Staff may notice that a particular product is difficult to locate, the holding area is too small or the order screen hides important details.

Click and collect setup checklist

Before launch, confirm that you have:

  • Chosen pickup locations and eligible products

  • Defined preparation times and order holding periods

  • Checked stock accuracy by location

  • Configured pickup options at checkout

  • Created a picking, checking and staging process

  • Reserved picked stock from other sales

  • Written customer confirmation and ready messages

  • Set clear collection instructions and signage

  • Trained staff to hand over and record orders

  • Tested cancellations, substitutions and uncollected orders

Click and collect can give customers another convenient way to receive their purchases. A reliable service depends on accurate stock, clear communication and a process store teams can follow every time.

Start with one or two locations if needed. Learn from the first orders, adjust the workflow and expand when your inventory and teams can support it.

Frequently Asked Questions

1. What is click and collect in retail?

Click and collect lets a customer order online and pick up the purchase from a store or designated collection point instead of having it delivered to their home.

2. Do retailers need real-time inventory for click and collect?

Real-time inventory can improve accuracy, but the important thing is to avoid promising stock that is not available. If updates are delayed, use conservative availability rules or confirm stock before notifying the customer that an order is ready.

3. How long should click-and-collect orders take to prepare?

Set a timeframe your team can meet consistently. It may vary by product, location, order size and staffing. Show the expected preparation time before the customer places the order.

4. Should customers pay online or at the store?

You can offer online payment, payment at collection or both, depending on your platform and business process. State the available options clearly at checkout and make sure the order and payment status are recorded correctly.

5. How long should a retailer hold an uncollected order?

Choose a holding period that fits your products and store operations. Tell customers how long the order will be held and send a reminder before it expires. Follow the same process consistently.

6. Can click and collect work across multiple store locations?

Yes, if the ecommerce platform and inventory process support location-level availability. Customers should see which branches can fulfil their order and receive instructions for the selected location.

7. What should a “ready for pickup” message include?

Include the order number, pickup location, address, opening hours, collection instructions and any details the customer needs to show staff. Send it only after the order is picked and checked.

8. What happens if an item is unavailable after the order is placed?

Contact the customer promptly. Explain the issue and offer the available options, such as waiting, choosing an alternative or cancelling the item, according to your store’s policies.

9. What is the difference between click and collect and curbside pickup?

Click and collect usually means the customer collects the order inside a store or at a designated counter. Curbside pickup is a variation where staff bring the order to the customer’s vehicle at a specified location.